Home » Products » Audio » Professional Audio » Amplifiers » Yamaha PC412-D Power Amplifier

Yamaha PC412-D Power Amplifier

USD 3,896.00 excl. Tax

Weight 15 kg
SKU: PC412-D Category:
Description
Click to rate this post!
[Total: 1 Average: 5]

Yamaha PC412-D 96kHz DSP Amplifier(4 x 1200w at 8ohms)

Yamaha PC412-D is so much more than just high-power amplifiers. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8Ω.

The onboard Dante inputs and outputs also allow redundant connections for handling 16 input/16 output audio at up to 96 kHz with low latency, while combining the PC-D / DI Series with remote software such as ProVisionaire Control provides even more flexibility and intuitive control.

Features:

  • 4 x 1200W at 8Ω
  • 20 x 8 powerful input matrix function
  • Sampling frequency is up to 96k
  • 16ch Dante input/output
  • Speaker processors such as 16 band PEQ, crossover, filters, delay, and limiter
  • Yamaha Speaker presets
  • Remote control via ProVisionaire Touch/Control

To view more Yamaha Products

Related Products:

 

Specifications
Click to rate this post!
[Total: 1 Average: 5]
Output Power; 1kHz, Non-clip, 20msec Burst, All channels driven 16Ω 600W x 4
1200W x 4
1900W x 4
2500W x 4
8Ω (BRIDGE mode) 3800W x 2
4Ω (BRIDGE mode) 5000W x 2
Hi-Z (70V mode)
Hi-Z (100V mode)
Amplifier class Class D, Single-ended output
Total harmonic distortion 0.01% (8Ω, 1kHz, 10W, All channels driven), 0.1% (4Ω, 1kHz, Half power, All channels driven)
Frequency response +0.5, -1.5dB @8Ω, 1W, 20Hz to 20kHz (HPF Thru)
Crosstalk ≦ -60dB (8Ω, 1kHz, Half power, Input 150Ω shunt A-weighted)
S/N ratio 112dB (8Ω, Gain setting = 32dB, A-weighted)
Voltage Gain/Sensitivity 8Ω Volume max 32.0dB/+10.0dBu (Gain setting: 32dB), 26.0dB/+16.0dBu (Gain setting: 26dB), 38.0dB/+4.0dBu (Gain setting: +4dBu), 28.0dB/+14.0dBu (Gain setting: +14.0dBu)
Hi-Z 100V mode, Volume max
Hi-Z 70V mode, Volume max
Protection circuit Load protection POWER switch on/off: Output mute, Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset, DC-fault: Power supply shutdown (NOT restored automatically)
Amplifier protection Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically), Over current: Output mute (Restored automatically), Over voltage: Output limiter (Restored automatically), Integrated Power Limit: Output limiter (Restored automatically)
Power supply protection Thermal: Output limiter (Restored automatically) → Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown
Cooling 7-step variable speed fan x 3, front to rear airflow
Maximum input voltage +28dBu
Input impedance 20kΩ (balanced)
Sampling frequency rate 96kHz
A/D D/A Converters AD: 24-bit linear; DA: 24-bit linear
Dante Interface Channel count 16 IN with Dante Redundancy, 16 OUT
Sampling frequency 96/88.2/48/44.1kHz
Dante latency 0.25/0.5/1/2/5ms
Bit depth 32/24bit
Processors 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 – 1000msec, Speaker Processor: X-Over (IIR/FIR), PEQ (16 bands IIR/FIR), Delay, Peak Limiter, RMS Limiter
Latency Analog Input to Speakers: 1.5msec; Dante Input to Speakers (Dante latency setup = 0.25msec): 1.8msec (fs=96kHz), 1.9msec (fs=88.2kHz), 2.5msec (fs=48kHz), 2.7msec (fs=44.1kHz)
I/O Connectors Analog Input XLR-3-31 x 4
Digital I/O Dante Interface: etherCON x 2 (Redundant/Daisy Chain)
Speaker Output Neutrik speakON NL4 x 4
Control ports RJ45 x 1
AC AC inlet (powerCON 20A) x 1
Others Remote, Fault Output: Euro block 8pin (mini) x2 (GPI x 4, GPO x 6, +5V x 2)
Indicators Power (Green) x 1; Channel Status x 4: Signal (Green), Limit (Yellow), Protect/Mute (Red); Auto LED off and dimmer feature (except POWER LED)
Power requirements 100V – 240V 50Hz/60Hz
Power consumption 1850W (1/8 MAX power, 2Ω, Pink noise at all channels), 190W (Idle), 105W (Sleep, all channels), 9W (Standby 100V/120V), 12W (Standby 230V)
Operating temperature 0°C to +40°C
Storage temperature -20°C to +60°C
Dimensions W 480mm (18.90 inches)
H 88mm (3.46 inch): 2U
D 528mm (20.79 inches)
Net weight 16.0 kg (35.3 lbs)
Accessories Owner’s Manual x 1, Power Cable (2.0m) x 1, GPIO Mini Euro block plug 3.5mm 8p x 2, Air filter (L x 1, R x 1), Grill (L x 1, R x 1), Handle x 2, Screw x 4
In The Box
Click to rate this post!
[Total: 1 Average: 5]
  • Owner’s Manual x 1
  • Power Cable (2.0m) x 1
  • GPIO Mini Euro block plug 3.5mm 8p x 2
  • Air filter (L x 1, R x 1)
  • Grill (L x 1, R x 1)
  • Handle x 2
  • Screw x 4
Delivery Info
Click to rate this post!
[Total: 1 Average: 5]

How to shop TAX free in Singapore

9% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall GST Refund Centre before departure with goods within 60 days from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme’s conditions and eligibility criteria can claim for the GST refund. Visit the following link for GST Guide for Visitors on Tourist Refund Scheme. https://www.iras.gov.sg/taxes/goods-services-tax-(gst)/consumers/tourist-refund-scheme


All items that are available for purchase online are subjected to availability. For item that are available, a confirmation email will be sent to your registered email to show that your order had been processed and is ready for collection / to be delivered. In the event whereby the item ordered is unavailable, a notification email will be sent and refund will be initiated immediately.

Self-collect: Item will be ready for collection at our store once the confirmation email is received. Orders that are made on the Weekends or Public Holiday may take about 2-4 working days to process.

Delivery (Local, Singapore): Small items: Delivery will take approximately 3-5 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Singpost or local couriers.

Large / Bulky items: Delivery will take approximately 7-10 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Expandore.

Delivery (Overseas); Shipment will be arranged with our courier partners to be delivered to your shipping address.

If you have other inquiries for placing of order and delivery, you can refer to our FAQ here (https://www.expandore.sg/faq/) Or Contact us here (https://www.expandore.sg/contact-us/)

Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.