(+65) 6841 2889 [email protected]
Panasonic PT-RQ50KE 4K Laser 3-Chip DLP Projector
Description
Click to rate this post!
[Total: 0 Average: 0]
Panasonic PT-RQ50KE 4K 3DLP Projector
Panasonic PT-RQ50K represents a milestone in projection technology. Panasonic PT-RQ50KE revolutionizes the Visual Experience with 50,000 lumens Brightness, Native 4K Resolution, and Vivid Color.
Serving flawless Native 4K (4096 x 2160) images with a laser engine that combines one red laser and two blue lasers operating at different wavelengths, light output is doubled from the same footprint as our 26,000 lm PT-RQ32K 4K projector. Deployed at sporting events, arena concerts, outdoor mapping attractions, or museum exhibitions, the PT-RQ50K’s refined power will exceed the highest expectations.
The PT-RQ50K equips dual power supplies and supports a 200–240 V current for full-brightness projection as well as 100–120 V at a lower brightness for setup and calibration. The PT-RQ50K can be set up and adjusted on regular mains power before high-current power is rolled out.
In the PT-RQ50K, an Information Monitor is located on the side panel adjacent to terminals and physical controls. The monitor provides menu-based navigation for smooth setup of Projector ID and basic network configuration. It also shows projector status including temperature, runtime, and active signal data, as well as error codes, should a problem be detected.
Features:
- 50,000 lm Native 4K Color-Rich Images for a Breathtaking Viewing Experience
- Versatile All-in-One Design Streamlines On-Site Workflow
- Original Cooling System Secures Projection Stability
- Supports 4K Input Signals
- 24/7 Continuous Operation
- Multi-Screen Support System
- Quick Start and Quick Off
- Multi-Unit Brightness and Color Control
- Data-cloning Function
- Frame-Delay Adjustment for Multi-Projection
- Information Monitor
- Backup Input
- Smart Projector Control App with NFC and Auto-Focus Functions
Specifications
Click to rate this post!
[Total: 0 Average: 0]
| General Specifications | |
| Specification | Description |
| Projector type | 3-Chip DLP projector |
| DLP chip | Display method | DLP chip x 3, DLP projection system |
| DLP chip | Number of Pixels | 8,847,360 (4096 x 2160) pixels x 3 |
| Light source | Laser diodes (Blue LD, Red LD) |
| Resolution | Native 4K (4096 x 2160 pixels) |
| Screen size [diagonal] | 2.54–38.1 m (100–1,500 in) with new optional lens for PT-RQ50K, 17:9 aspect ratio |
| LENS | New optional lenses for PT-RQ50K (no lens included with this model) |
| Lens shift | Vertical (from center of screen) | ±45 % (±25 % with ET-D3QT600, ±30 % with ET-D3QT700/ET-D3QT800, ±40 % with ET-D3QW300) (powered) |
| Lens shift | Horizontal (from center of screen) | ±16 % (±8 % with ET-D3QT600, ±10 % with ET-D3QT700/ET-D3QT800, ±14 % with ET-D3QW300) (powered) |
| Keystone correction range | Vertical: ±40° (±28° with ET-D3QW300), Horizontal: ±40° (±15° with ET-D3QW300) |
| Installation | Horizontal/vertical, free 360-degree installation |
| Terminals | MULTI PROJECTOR SYNC IN | BNC x 1 |
| Terminals | MULTI PROJECTOR SYNC OUT | BNC x 1 |
| Terminals | SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
| Terminals | REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control |
| Terminals | REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) |
| Terminals | DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT compliant), PJLink (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible |
| Terminals | LAN | RJ-45 x 1 for network connection, PJLink (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible |
| Terminals | Expansion Slot 1 | Interface Board for 12G-SDI (ET-MDN12G10) supplied |
| Terminals | Expansion Slot 2 | Optional interface boards, SLOT NX compatible |
| Power supply | AC 200–240 V, 50/60 Hz; AC 100–120 V, 50/60 Hz (Brightness restricted to one-fifth with a voltage of 100‒120 V) |
| Power consumption | 4,100 W (AC 100–120 V: 1,100 W, Standby Mode: 6 W) |
| Cabinet materials | Metal (Partly Plastic Mold) |
| Operation noise | 52 dB |
| Dimensions (W x H x D) | 720 x 445 x 1,070 mm (28 11/32˝ x 17 17/32˝ x 42 1/8˝ ) (excluding handle, adjuster feet, and other protruding parts) |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F) , operating humidity: 10–80 % (no condensation) |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android |
| Note | 1. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is the average of all products when shipped.
2. Average light-output value of all shipped products measured at the center of the screen in NORMAL Mode. 3. Around this time, the light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [3], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. The estimated time until light output declines to 50 % varies depending on the environment. 4. Average value. It May differ depending on the actual unit. 5. The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) if the projector is used at an altitude between 1,400 m (4,593 ft) and 4,200 m (13,780 ft). 6. When the optional AJ-WM50 wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F). 7. When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector. |
| Center-to-corner zone ratio | 90% |
| Terminals | USB | USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series) / USB Memory Stick |
| Terminals | REMOTE IN | M3 stereo mini-jack x 1 for wired remote control |
| Weight | Approx. 126 kg (278 lbs) (without lens) |
| Terminals | DC OUT | USB connector (Type A) x 2 for power supply only (DC 5 V, total of 2 A) |
| Contrast Ratio | 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
| DLP chip | Panel size | 35.1 mm (1.38 in) diagonal (17:9 aspect ratio) |
| Time until light output declines to 50 %3 | 20,000 hours (NORMAL) |
| Light output | 50,000 lm / 51,000 lm (Center) |
Delivery Info
Click to rate this post!
[Total: 0 Average: 0]
How to shop TAX free in Singapore
9% Goods Service Tax (GST) will be imposed over the total invoice value if purchased locally in Singapore. However if you are a tourist visiting Singapore, this GST amount can be refunded at the Changi International Airport Departure Hall GST Refund Centre before departure with goods within 60 days from the date of purchase. Please note that only Tourists who have met the Tourist Refund Scheme’s conditions and eligibility criteria can claim for the GST refund. Visit the following link for GST Guide for Visitors on Tourist Refund Scheme. https://www.iras.gov.sg/taxes/goods-services-tax-(gst)/consumers/tourist-refund-scheme
All items that are available for purchase online are subjected to availability. For item that are available, a confirmation email will be sent to your registered email to show that your order had been processed and is ready for collection / to be delivered. In the event whereby the item ordered is unavailable, a notification email will be sent and refund will be initiated immediately.
Self-collect: Item will be ready for collection at our store once the confirmation email is received. Orders that are made on the Weekends or Public Holiday may take about 2-4 working days to process.
Delivery (Local, Singapore): Small items: Delivery will take approximately 3-5 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Singpost or local couriers.
Large / Bulky items: Delivery will take approximately 7-10 working days (excluding weekends and public holidays) to be delivered upon confirmation of order. Orders will be delivered by Expandore.
Delivery (Overseas); Shipment will be arranged with our courier partners to be delivered to your shipping address.
If you have other inquiries for placing of order and delivery, you can refer to our FAQ here (https://www.expandore.sg/faq/) Or Contact us here (https://www.expandore.sg/contact-us/)
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
Clear filtersThere are no reviews yet.